ARM ADC
Quiz Summary
0 of 20 Questions completed
Questions:
Information
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading…
You must sign in or sign up to start the quiz.
You must first complete the following:
Results
Results
0 of 20 Questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 point(s), (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
Categories
- Not categorized 0%
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- Current
- Review
- Answered
- Correct
- Incorrect
-
Question 1 of 20
1. Question
The difference between analog voltage represented by two adjacent digital codes, or the analog step size, is ____
CorrectIncorrect -
Question 2 of 20
2. Question
How many channels ADC are there in cortex 1768?
CorrectIncorrect -
-
Question 3 of 20
3. Question
Select the features of ADC in LPC1768.
CorrectIncorrect -
Question 4 of 20
4. Question
The converted result will be stored in which register?
CorrectIncorrect -
Question 5 of 20
5. Question
Which bits of ADCR is used to start the ADC conversion in 1768?
CorrectIncorrect -
Question 6 of 20
6. Question
Which bit is considered as power down bit in ADCR?
CorrectIncorrect -
Question 7 of 20
7. Question
Which register is used to enable the interrupt for ADC?
CorrectIncorrect -
Question 8 of 20
8. Question
What is the maximum operating frequency of ADC in 1768?
CorrectIncorrect -
Question 9 of 20
9. Question
When ADC conversion will be started in LPC1768?
CorrectIncorrect -
Question 10 of 20
10. Question
In order to enable repeated conversion which bit of ADCR is used?
CorrectIncorrect -
Question 11 of 20
11. Question
Select the registers of ADC.
CorrectIncorrect -
Question 12 of 20
12. Question
How many bit resolution ADC we have on LPC1768 board?
CorrectIncorrect -
Question 13 of 20
13. Question
Which bit will indicate the end of conversion?
CorrectIncorrect -
Question 14 of 20
14. Question
How to select ADC channels?
CorrectIncorrect -
Question 15 of 20
15. Question
If we use burst mode how frequently conversion will be done?
CorrectIncorrect -
Question 16 of 20
16. Question
DONE bit is cleared by ____
CorrectIncorrect -
Question 17 of 20
17. Question
The digital data will be present in ADDRn of _____ bits
CorrectIncorrect -
Question 18 of 20
18. Question
ADC function should be selected by PINSEL register then only ADC will work.
CorrectIncorrect -
Question 19 of 20
19. Question
Can we synchronize ADC start of conversion with external interrupt 0?
CorrectIncorrect -
Question 20 of 20
20. Question
EDGE bit in ADCR is significant only when the START field of ADCR contains _____
CorrectIncorrect