ARM- TIMERS

Can we start and stop the timer by external pins?

What is the use of prescalar?

Count control register is used to select between ___ modes.

Capturing of a timer value can be configured for ____ edge of capture pin.

Total number of capture registers in lpc1768 are

Peripheral clock for timer 2 and 3 can be configured in which register?

Total number of timers in lpc1768 are

All timers are ___ bit registers and prescalar is ___ bit register

When counter mode is chosen in count control register, capture input is sampled on ____ edge of the PCLK.

When a match occurs between TC and MRx, then what all functionalities can be done on external MAT pin?

___ register is incremented on every edge change on capture input in counter mode of count control register.

Interrupt generation on every capture signal when the capture register load the timer value can be configured in which register?

On reset which timers are enabled and which timers are disabled?

Total number of match registers in lpc1768 are

Peripheral clock for timer 0 and 1 can be configured in which register?

If more than one pin is selected for a capture input on a single timer 0 or 1 channel which pin is considered?

When timer interrupt is generated?

The match control register is used to control what operations when one of the match registers matches the timer counter?

Capture register is loaded with the value of _____ register whenever a capture signal occurs.

External match register provides _____ of the external match pins